Origin of adiabatic and non-adiabatic spin transfer torques in current-driven magnetic domain wall motion

A consistent theory to describe the correlated dynamics of quantum mechanical itinerant spins and semiclassical local magnetization is given. We consider the itinerant spins as quantum mechanical operators, whereas local moments are considered within classical Lagrangian formalism. By appropriately treating fluctuation space spanned by basis functions, including a zero-mode wave function, we construct coupled equations of motion for the collective coordinate of the center-of-mass motion and the localized zero-mode coordinate perpendicular to the domain wall plane. By solving them, we demonstrate that the correlated dynamics is understood through a hierarchy of two time scales: Boltzmann relaxation time when a non-adiabatic part of the spin-transfer torque appears, and Gilbert damping time when adiabatic part comes up.Comment: 4 pages, 2 figure

Wireless Avionics Packet to Support Fault Tolerance for Flight Applications

In this protocol and packet format, data traffic is monitored by all network interfaces to determine the health of transmitter and subsystems. When failures are detected, the network inter face applies its recover y policies to provide continued service despite the presence of faults. The protocol, packet format, and inter face are independent of the data link technology used. The current demonstration system supports both commercial off-the-shelf wireless connections and wired Ethernet connections. Other technologies such as 1553 or serial data links can be used for the network backbone. The Wireless Avionics packet is divided into three parts: a header, a data payload, and a checksum. The header has the following components: magic number, version, quality of service, time to live, sending transceiver, function code, payload length, source Application Data Interface (ADI) address, destination ADI address, sending node address, target node address, and a sequence number. The magic number is used to identify WAV packets, and allows the packet format to be updated in the future. The quality of service field allows routing decisions to be made based on this value and can be used to route critical management data over a dedicated channel. The time to live value is used to discard misrouted packets while the source transceiver is updated at each hop. This information is used to monitor the health of each transceiver in the network. To identify the packet type, the function code is used. Besides having a regular data packet, the system supports diagnostic packets for fault detection and isolation. The payload length specifies the number of data bytes in the payload, and this supports variable-length packets in the network. The source ADI is the address of the originating interface. This can be used by the destination application to identify the originating source of the packet where the address consists of a subnet, subsystem class within the subnet, a subsystem unit, and the local ADI number. The destination ADI is used to route the packet to its ultimate destination. At each hop, the sending interface uses the destination address to determine the next node for the data. The sending node is the node address of the interface that is broadcasting the packet. This field is used to determine the health of the subsystem that is sending the packet. In the case of a packet that traverses several intermediate nodes, it may be the node address of the intermediate node. The target node is the node address of the next hop for the packet. It may be an intermediate node, or the final destination for the packet. The sequence number is used to identify duplicate packets. Because each interface has multiple transceivers, the same packet will appear at both receivers. The sequence number allows the interface to correlate the reception and forward a single, unique packet for additional processing. The subnet field allows data traffic to be partitioned into segregated local networks to support large networks while keeping each subnet at a manageable size. This also keeps the routing table small enough so routing can be done by a simple table lookup in an FPGA device. The subsystem class identifies members of a set of redundant subsystems, and, in a hot standby configuration, all members of the subsystem class will receive the data packets. Only the active subsystem will generate data traffic. Specific units in a class of redundant units can be identified and, if the hot standby configuration is not used, packets will be directed to a specific subsystem unit

Interface Supports Lightweight Subsystem Routing for Flight Applications

A wireless avionics interface exploits the constrained nature of data networks in flight systems to use a lightweight routing method. This simplified routing means that a processor is not required, and the logic can be implemented as an intellectual property (IP) core in a field-programmable gate array (FPGA). The FPGA can be shared with the flight subsystem application. In addition, the router is aware of redundant subsystems, and can be configured to provide hot standby support as part of the interface. This simplifies implementation of flight applications requiring hot stand - by support. When a valid inbound packet is received from the network, the destination node address is inspected to determine whether the packet is to be processed by this node. Each node has routing tables for the next neighbor node to guide the packet to the destination node. If it is to be processed, the final packet destination is inspected to determine whether the packet is to be forwarded to another node, or routed locally. If the packet is local, it is sent to an Applications Data Interface (ADI), which is attached to a local flight application. Under this scheme, an interface can support many applications in a subsystem supporting a high level of subsystem integration. If the packet is to be forwarded to another node, it is sent to the outbound packet router. The outbound packet router receives packets from an ADI or a packet to be forwarded. It then uses a lookup table to determine the next destination for the packet. Upon detecting a remote subsystem failure, the routing table can be updated to autonomously bypass the failed subsystem

Thermally assisted domain walls quantum tunneling at the high temperature range

A theoretical and numerical investigations of the quantum tunneling of the domain walls in ferromagnets and weak ferromagnets was performed taking into account the interaction between walls and thermal excitations of a crystal. The numerical method for calculations of the probability of a thermally stimulated quantum depinning as the function of temperature at the wide temperature range has been evolved.Comment: 5 pages, 3 figure

The Phytogeography and Ecology of the Coastal Atacama and Peruvian Deserts

The Atacama and Peruvian Deserts form a continuous belt for more than 3500 km along the western escarpment of the Andes from northern Peru to northernmost Chile. These arid environments are due to a climatic regime dominated by the cool, north-flowing Humboldt (Peruvian) Current. Atmospheric conditions influenced by a stable, subtropical anticyclone result in a mild, uniform coastal climate nearly devoid of rain, but with the regular formation of thick stratus clouds below I 000 m during the winter months. Where coastal topography is low and flat, the clouds dissipate inward over broad areas with little biological impact. However, where isolated mountains or steep coastal slopes intercept the clouds, a fog-zone develops. This moisture allows the development of plant communities termed lomas formations. These floristic assemblages function as islands separated by hyperarid habitat devoid of plant life. Since growth is dependent upon available moisture, an understanding of climatic patterns is essential in efforts to interpret present-day plant distributions. Topography and substrate combine to influence patterns of moisture availability. The ecological requirements and tolerances of individual species ultimately determines community composition. Species endemism exceeds 40% and suggests that the lomas formations have evolved in isolation from their nearest geographic neighbors in the Andes. While the arid environment is continuous, there appears to be a significant barrier to dispersal between 18° and 22°S latitude in extreme northern Chile. Less than 7% of a total flora, estimated at nearly 1000 species, occur on both sides ofthis region. Viable hypotheses concerning the age and origins of these desert floras will require continued study of the ecology and biogeography of their component species

Size Effects in Carbon Nanotubes

The inter-shell spacing of multi-walled carbon nanotubes was determined by analyzing the high resolution transmission electron microscopy images of these nanotubes. For the nanotubes that were studied, the inter-shell spacing ${\hat{d}_{002}}$ is found to range from 0.34 to 0.39 nm, increasing with decreasing tube diameter. A model based on the results from real space image analysis is used to explain the variation in inter-shell spacings obtained from reciprocal space periodicity analysis. The increase in inter-shell spacing with decreased nanotube diameter is attributed to the high curvature, resulting in an increased repulsive force, associated with the decreased diameter of the nanotube shells.Comment: 4 pages. RevTeX. 4 figure

Precision Electron-Beam Polarimetry using Compton Scattering at 1 GeV

We report on the highest precision yet achieved in the measurement of the polarization of a low energy, $\mathcal{O}$(1 GeV), electron beam, accomplished using a new polarimeter based on electron-photon scattering, in Hall~C at Jefferson Lab. A number of technical innovations were necessary, including a novel method for precise control of the laser polarization in a cavity and a novel diamond micro-strip detector which was able to capture most of the spectrum of scattered electrons. The data analysis technique exploited track finding, the high granularity of the detector and its large acceptance. The polarization of the $180~\mu$A, $1.16$~GeV electron beam was measured with a statistical precision of $<$~1\% per hour and a systematic uncertainty of 0.59\%. This exceeds the level of precision required by the \qweak experiment, a measurement of the vector weak charge of the proton. Proposed future low-energy experiments require polarization uncertainty $<$~0.4\%, and this result represents an important demonstration of that possibility. This measurement is also the first use of diamond detectors for particle tracking in an experiment.Comment: 9 pages, 7 figures, published in PR

Direct measurements of OH and other product yields from the HO2 + CH3C(O)O2 reaction

The reaction CH3C(O)O2 + HO2 → CH3C(O)OOH+O2 (Reaction R5a), CH3C(O)OH+O3 (Reaction R5b), CH3+CO2+OH+O2 (Reaction R5c) was studied in a series of experiments conducted at 1000 mbar and (293±2)K in the HIRAC simulation chamber. For the first time, products, (CH3C(O)OOH, CH3C(O)OH, O3 and OH) from all three branching pathways of the reaction have been detected directly and simultaneously. Measurements of radical precursors (CH3OH, CH3CHO), HO2 and some secondary products HCHO and HCOOH further constrained the system. Fitting a comprehensive model to the experimental data, obtained over a range of conditions, determined the branching ratios α(R5a) = 0.37±0.10, α(R5b) =0.12±0.04 and α(R5c) =0.51±0.12 (errors at 2σ level). Improved measurement/model agreement was achieved using k(R5) =(2.4±0.4)×10-11 cm3 molecule-1 s-1, which is within the large uncertainty of the current IUPAC and JPL recommended rate coefficients for the title reaction. The rate coefficient and branching ratios are in good agreement with a recent study performed by Groß et al. (2014b); taken together, these two studies show that the rate of OH regeneration through Reaction (R5) is more rapid than previously thought. GEOS-Chem has been used to assess the implications of the revised rate coefficients and branching ratios; the modelling shows an enhancement of up to 5% in OH concentrations in tropical rainforest areas and increases of up to 10% at altitudes of 6-8 km above the equator, compared to calculations based on the IUPAC recommended rate coefficient and yield. The enhanced rate of acetylperoxy consumption significantly reduces PAN in remote regions (up to 30 %) with commensurate reductions in background NOx

The evolution of reproductive isolation in a simultaneous hermaphrodite, the freshwater snail Physa

<p>Abstract</p> <p>Background</p> <p>The cosmopolitan freshwater snail <it>Physa acuta </it>has recently found widespread use as a model organism for the study of mating systems and reproductive allocation. Mitochondrial DNA phylogenies suggest that <it>Physa carolinae</it>, recently described from the American southeast, is a sister species of <it>P. acuta</it>. The divergence of the <it>acuta/carolinae </it>ancestor from the more widespread <it>P. pomilia </it>appears to be somewhat older, and the split between a hypothetical <it>acuta/carolinae/pomilia </it>ancestor and <it>P. gyrina </it>appears older still.</p> <p>Results</p> <p>Here we report the results of no-choice mating experiments yielding no evidence of hybridization between <it>gyrina </it>and any of four other populations (<it>pomilia, carolinae</it>, Philadelphia <it>acuta</it>, or Charleston <it>acuta</it>), nor between <it>pomilia </it>and <it>carolinae</it>. Crosses between <it>pomilia </it>and both <it>acuta </it>populations yielded sterile F1 progeny with reduced viability, while crosses between <it>carolinae </it>and both <it>acuta </it>populations yielded sterile F1 hybrids of normal viability. A set of mate-choice tests also revealed significant sexual isolation between <it>gyrina </it>and all four of our other <it>Physa </it>populations, between <it>pomilia </it>and <it>carolinae</it>, and between <it>pomilia </it>and Charleston <it>acuta</it>, but not between <it>pomilia </it>and the <it>acuta </it>population from Philadelphia, nor between <it>carolinae </it>and either <it>acuta </it>population. These observations are consistent with the origin of hybrid sterility prior to hybrid inviability, and a hypothesis that speciation between <it>pomilia </it>and <it>acuta </it>may have been reinforced by selection for prezygotic reproductive isolation in sympatry.</p> <p>Conclusions</p> <p>We propose a two-factor model for the evolution of postzygotic reproductive incompatibility in this set of five <it>Physa </it>populations consistent with the Dobzhansky-Muller model of speciation, and a second two-factor model for the evolution of sexual incompatibility. Under these models, species trees may be said to correspond with gene trees in American populations of the freshwater snail, <it>Physa</it>.</p